interior trim squeak rattle lubricants 335pixels

IKV TRIBOLOGY now has ISO/TS 16949

ISO/ TS 16949 is the global technical specification and quality management standard for the automotive industry. It brings together standards from across Europe and the US.
 
ISO/TS 16949 outlines everything you need to know about achieving best practice when designing, developing, manufacturing, installing or servicing automotive products.
 
The ISO/TS 16949 is an ISO technical specification aimed at the development of a quality management system that provides for continual improvement, emphasizing defect prevention and the reduction of variation and waste in the supply chain.
 
It is based on the ISO 9001 standard. For further information contact us on +44 (0) 1291 691953.

corrugator industry lubricants

IKV Launch New Corrugator Grease Range

In a globally competitive market corrugating manufacturers have to ensure maximum performance from their machinery. This means that machinery needs to last longer, require less maintenance and produce quality, end products.

IKV Group manufacture high performance lubricants formulated specifically for the needs of the corrugating industry & have launched a new corrugator grease
range.

CORRUGATOR ROLL SUPPORT BEARING LUBRICATION

IKV-TRIBOFLON MYA FG Corrugator Greases offer:-

 

  • Highly reduced wear at friction points
     
  • A reduced coefficient of friction
     
  • Absence of solid oxidation or formation of gummy residues.
     
  • Increase working stability under the influence of roll lamination  
     
  • Lower volatility at high temperatures
     
  • Lower separation of the base oil thus reducing grease thickening.
     
All materials used in the formulations of IKV-TRIBOFLON appear in the positive list 21 CFR of the Food and Drugs Administration (FDA). This permits certification to NSF Class H-1 according to National Sanitary Foundation requirements for Food Grade Lubricants making the product ideal for the production of food grade packaging.

See below NLGI grades & temperature guide for IKV-TRIBOFLON.   
GreaseNature of Base OilNLGI GradeUseable Temp Range
IKV TRIBOFLON MYA 242 FGPFPE2-36 TO 260°C
IKV TRIBOFLON MYA 241 FGPFPE1-36 TO 260°C
IKV TRIBOFLON MYA 240 FGPFPE0-36 TO 260°C
IKV TRIBOFLON MYA 502 FGPFPE2-30 TO 285°C
IKV TRIBOFLON MYA 501 FGPFPE1-30 TO 260°C
IKV TRIBOFLON MYA 500 FGPFPE0-30 TO 260°C

PTFE Spray Copper Anti Sezie Open Gear Sprays_Clipped_212 pixels wide_160601

IKV UK launch new maintenance sprays - copper anti-seize, open gear and PTFE dry film aerosols.

IKV are pleased to announce the launch of their new maintenance sprays - TRIBOFOOD PTFE Dry Film Spray, TRIBOGEAR Open Gear Spray & COPPER ANTI-SEIZE spray. 


Our IKV COPPER ANTI SEIZE Spray is a non-melting lubricant for the prevention of seizure and is effective up to 1200°C. It is extremely temperature resistant, protects screw threads, linkages, pivots and mating surfaces. It is ideal for high loads, reduces fretting corrosion and resists wash off. It can be used on bearings, pivots, slides and articulations in the presence of water, chemical & galvanic corrosion. It prevents the ingress of water and corrosive solutions.
 
IKV TRIBOFOOD PTFE DRY FILM Spray is a non-staining & friction reducing, multi-purpose, convenient-to-use, dry film lubricant. It is a clear, non-toxic premium quality spray with food safe ingredients, ideal for use in the food industry for the protection of seals and bearings. It offers an effective temperature resistance from -20 to 270°C and is safe for use where incidental contact with food may occur. The lubricant forms a clean, dry film with effective anti-stick properties and offers good resistance to water, oils and solvents.
 
IKV TRIBOGEAR OPEN GEAR Spray is a premium quality, highly adhesive, waterproof, heavy duty, tenacious lubricant for open lubrication points. It is the ideal heavy duty lubricant for chains, open gears, wire ropes, telescopic booms, guides and slides. It is highly water resistant, extreme high load, long-life grease in a handy to use aerosol spray. It is formulated with premium quality aluminium complex grease, refined base oils and incorporates solid lubricating additives, polymers, extreme pressure additives, antioxidants and corrosion inhibitors.
 
Please contact us for technical details, pricing and samples.