Aluminium Can Production
IKV manufacture a range of speciality greases, oils & dry film coatings for the aluminium can, aerosol and tube industries.
Our products include lubricants for:
- Extrusion Presses and Reduction Machines
- Accumulator Lines
- Washer Lines
- Annealing Lines
- Inside Liner Chains
- Decoration Line Chains
- Oven Bearings
- Gear Boxes, Angle Drives and Indexers
- Transmission, Belt & Cooler Chains
Extrusion Presses and Reduction Machines
IKV-TRIBOSLIDE 68 WR is an oil with specific qualities to avoid wear for slow displacement speeds, such as on slides. This product is free of viscous additives and metallic salts, which could form a foamy soap in the presence of moisture and progressively clog filters.
IKV-TRIBOCHAIN 32 M is appropriate for the lubrication of pin chains that are subject to micro shocks from jerky movement. It prevents tribocorrosion (fretting) resulting from the micro shocks.
IKV-FLUOR 32 is characterised by its ability not to mix with the surrounding products during thermal decomposition. It thus provides the capacity to maintain clean lines over long periods of time and to lengthen the lubrication cycles.
IKV-TRIBOCHAIN 150 WR is an adhesive and hydrophobic oil that provides optimal chain lubrication of these lines subjected to water washout. Temperature range: -10°C to 150°C
IKV-TRIBOPASTE HT FLUID is an oily fluid containing solid lubricants, which permits the penetration of the solids into the friction points of the chain by a capillary action. Temperature range: -10°C to 150°C
IKV-TRIBOGRAF HTG V4 is a semi-colloidal suspension in soluble oil and water for relubrication of very hot chains. Temperature range: 0°C to 1000°C
Inside Liner Chains
IKV-TRIBOCHAIN 1680 is a low smoke oil with a high thermal stability, which does not form carbon residues. Its durably maintains the chains in an excellent state of cleanliness.
Decoration Line Chains
IKV-FLUOR 450 is an oil with extremely high thermal stability, which allows very long lubrication cycles - up to 1 year depending on temperatures. This oil is residue free and will not mix with production paints and solvents, keeping the chains clean. Temperature range : -30°C to 300°C
IKV-FLUOR MPA 2 H is a high-quality lubricant, thermally stable, which allows periods of 4 years between lubrication intervals. Temperature range: -30°C to 300°C
IKV-TRIBOSTAR ELK 322 is a long-lasting lubricant, which does not produce carbon residues that are harmful to the regeneration of the lubricant film. Temperature range: -20°C to 180°C
Gear Boxes, Angle Drives and Indexers
IKV-TRIBOGEAR PG 220 & IKV-TRIBOGEAR PG 460 (very long-lasting gear box oils) have excellent resistance to high pressure and significantly decrease the friction factor, particularly in the presence of slippage and low linear speeds. Temperature range: -30°C to 180°C
IKV-TRIBOGEAR GLS 159 is a very long-lasting lubricant recommended for hard to reach spur or worm gears. Temperature range: -40°C to 150°C